Honeywell Sensepoint Plus gas detection sensors
The Sensepoint Plus range of sensors provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in
potentially explosive atmospheres, both in and out of doors and compliments the Sensepoint and Sensepoint Pro range of gas sensors.
Users can modify detector operation using the remote control provided without ever needing to open the unit. This enables one man, non-intrusive, operation and reduces routine maintenance time and costs.
The built-in transmitter includes a user configurable ‘inhibit switch’ that clamps the current output of the detector to a known level so that during maintenance no false alarms can be triggered at associated control equipment. As such, the Sensepoint Plus can be easily maintained even when used with ‘blind’ PLC type control systems.
Sensepoint Plus is supplied with all necessary accessories for easy installation. The detector can be mounted on a wall or round support pole using the universal bracket provided. The detector is ideal for use with either conduit or steel wire armored cable and glands. A 3/4” NPT entry and M20 adaptor are supplied as standard. A weatherproof cap is also included for use in the harshest outdoor conditions.
Overall, the Sensepoint Plus ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using an easy to replace plug-in sensor, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors and patented Surecell™ toxic sensor technology.
Sensepoint Plus from Honeywell Analytics (manufacturers of toxic and flammable gas detection systems under the Sieger and Zareba brands) meets the more demanding user requirements but assures you of the most cost effective solution to your gas detection needs in the long run.
Sensepoint Plus can be used with a choice of controllers such as the Honeywell Zareba Unipoint, Touchpoint 1 and Touchpoint 4 or operated from any control system which accepts the industry standard 4-20mA signal.
Sensepoint Plus is part of the complete range of Sensepoint gas sensors from Honeywell Zareba including; Sensepoint and Sensepoint Pro.
Note: Sensepoint Plus flammable is preconfigured for 0-100% LEL methane. Contact the sales office for other flammable gas configurations.
The Sensepoint Plus has been superceded by the SensepointXCD range.
Sensepoint XCD replacement sensors are fully compatible with Sensepoint Plus
Contact the sales office quoting part number:
SPPPXXF1SS - 0-100%LEL - OBSOLETE - Replacement 3532-201 SPXCDXSFXSS
SPPPXXC1SS - 0-200ppm CO - OBSOLETE - Replacement 3532-205 SPXCDXSCXSS
SPPPXXC2SS - 0-500ppm CO - OBSOLETE - Replacement 3532-205 SPXCDXSCXSS
SPPPXXH1SS - 0-50ppm H2S - OBSOLETE - Replacement 3532-204 SPXCDXSHXSS
SPPPXXH2SS - 0-20ppm H2S - OBSOLETE - Replacement 3532-204 SPXCDXSHXSS
SPPPXXH3SS - 0-100ppm H2S - OBSOLETE - Replacement 3532-204 SPXCDXSHXSS
SPPPXXG1SS - 0-1000ppm H2 - OBSOLETE - Replacement 3532-205 SPXCDXSFXSS
SPPPXXO1SS - 0-25%v/v O2 - OBSOLETE - Replacement 3532-203 SPXCDXSO1SS
Users can modify detector operation using the remote control provided without ever needing to open the unit. This enables one man, non-intrusive, operation and reduces routine maintenance time and costs.
The built-in transmitter includes a user configurable ‘inhibit switch’ that clamps the current output of the detector to a known level so that during maintenance no false alarms can be triggered at associated control equipment. As such, the Sensepoint Plus can be easily maintained even when used with ‘blind’ PLC type control systems.
Sensepoint Plus is supplied with all necessary accessories for easy installation. The detector can be mounted on a wall or round support pole using the universal bracket provided. The detector is ideal for use with either conduit or steel wire armored cable and glands. A 3/4” NPT entry and M20 adaptor are supplied as standard. A weatherproof cap is also included for use in the harshest outdoor conditions.
Overall, the Sensepoint Plus ensures easy installation and the fastest routine operation by removing the need for hot work permits in hazardous areas. Using an easy to replace plug-in sensor, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors and patented Surecell™ toxic sensor technology.
Sensepoint Plus from Honeywell Analytics (manufacturers of toxic and flammable gas detection systems under the Sieger and Zareba brands) meets the more demanding user requirements but assures you of the most cost effective solution to your gas detection needs in the long run.
Sensepoint Plus can be used with a choice of controllers such as the Honeywell Zareba Unipoint, Touchpoint 1 and Touchpoint 4 or operated from any control system which accepts the industry standard 4-20mA signal.
Sensepoint Plus is part of the complete range of Sensepoint gas sensors from Honeywell Zareba including; Sensepoint and Sensepoint Pro.
Note: Sensepoint Plus flammable is preconfigured for 0-100% LEL methane. Contact the sales office for other flammable gas configurations.
- Features:
- Flammable, toxic and oxygen versions available
- Suitable for indoor or outdoor use
- IP65 as standard
- Surecell™ electrochemical sensors
- Poison resistant catalytic bead
- Proven, fast and reliable
- ATEX certified (UL certified versions available on request)
- Non intrusive, one man operation
- Typical 2 to 5 year operational life
- 3/4" NPT and M20 conduit connections
- Sensepoint Plus supplied complete with:
- 3/4"NPT to M20 adaptor
- Wall mounting bracket
- Pole mounting bracket
- Weatherproof cap
- Necessary Allen keys
- User manual
The Sensepoint Plus has been superceded by the SensepointXCD range.
Sensepoint XCD replacement sensors are fully compatible with Sensepoint Plus
Contact the sales office quoting part number:
SPPPXXF1SS - 0-100%LEL - OBSOLETE - Replacement 3532-201 SPXCDXSFXSS
SPPPXXC1SS - 0-200ppm CO - OBSOLETE - Replacement 3532-205 SPXCDXSCXSS
SPPPXXC2SS - 0-500ppm CO - OBSOLETE - Replacement 3532-205 SPXCDXSCXSS
SPPPXXH1SS - 0-50ppm H2S - OBSOLETE - Replacement 3532-204 SPXCDXSHXSS
SPPPXXH2SS - 0-20ppm H2S - OBSOLETE - Replacement 3532-204 SPXCDXSHXSS
SPPPXXH3SS - 0-100ppm H2S - OBSOLETE - Replacement 3532-204 SPXCDXSHXSS
SPPPXXG1SS - 0-1000ppm H2 - OBSOLETE - Replacement 3532-205 SPXCDXSFXSS
SPPPXXO1SS - 0-25%v/v O2 - OBSOLETE - Replacement 3532-203 SPXCDXSO1SS
 |
Sensepoint Plus datasheet |
 |
Sensepoint Plus user manual |
