Honeywell Series 3000 MkII transmitters and gas detection sensors

The Series 3000 MkII from Honeywell Analytics provides comprehensive monitoring of toxic and Oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors.

This low powered gas detector operates on an industry standard 2-wire 4-20mA loop, making it ideal for both new and retrofit applications. Users can configure the detector without the need of a ‘hot work permit’ by using the LCD and magnetic switches. Fault diagnostic software and programmable calibration due frequency simplifies maintenance procedures.

The intrinsically safe smart sensors are supplied pre-configured and can be ‘hot swapped’ without having to remove power to the detector, saving time and money during commissioning and routine servicing. A remote sensor mounting kit is available that allows the sensor to be mounted up to 15m (50ft) from the transmitter, making it ideal for operation in areas that are difficult to access.

Series 3000 MkII is ideal to integrate with existing industry standard 4-20mA loop systems or with a choice of controllers such as the Honeywell Zareba Unipoint, Touchpoint 1 and Touchpoint 4.

• Features:
  • Proven electrochemical sensing technology
  • Uses Surecell" electrochemical cells, ideal for hot and humid environments
  • Long-life sensing elements (typical >2 years)
  • Surecell and Reflex - Superior performance sensing technology. Increased accuracy and reliability. Determines the health of O2 and toxic cells. Detects “dry-out” of the sensor cell. Ensures highest level of “up-time”
  • Plug and play factory configured sensors
  • Non-intrusive operation - Easy routine maintenance. No need to open the transmitter. Faster planned maintenance. Greater operator confidence
  • Housing material options - aluminium alloy or Stainless Steel 316
  • Easy to install - Simple plug-in sensors. Integral wall mount lugs. Separate kit for vertical/horizontal pipe mount.

Series 3000 MkII consists of transmitter and serviceable plug-in sensor. Order plug-in smart sensor separately

• Series 3000 MkII supplied complete with:
  • Series 3000 MkII transmitter with integral surface mounting lugs
  • 2 x M20 cable entries (ATEX/IECEx certified versions)
  • 1 x blanking plug
  • Magnetic wand and Allen key
  • User manual

• Optional accessories:
  • S3KCAL Calibration cap
  • S3KCC Collecting cone (for use with detecting hydrogen gas only)
  • S3KDMK Duct mounting kit (O2, CO, H2S or H2 gas only)
  • SPXCDMTBR Pipe Mounting bracket (inc. fixings and hex wrench set)
  • SPXCDSDP Sunshade/Deluge Protection
  • S3KRMK ATEX/UL/c-UL approved remote sensor mounting kit (includes enclosure with sensor socket, 15m (50 feet) of digital cable and glands, transmitter cable plug, mounting screws)

• Replacement gas sensors available. Contact the sales office quoting part number:
  • 3570-201 Oxygen 0-25%VOL (S3KO1SS)
  • 3570-202 Carbon Monoxide 0-300ppm (100 to 999ppm, 100ppm) (S3KC1SS)
  • 3570-203 Hydrogen Sulphide 0-15ppm (10 to 50ppm, 1ppm) (S3KH1SS)
  • 3570-204 Hydrogen Sulphide 0-100ppm (50 to 500ppm, 10ppm) (S3KH2SS)
  • 3570-205 Chlorine 0-5.0ppm (5.0 to 20.0ppm, 5.0ppm) (S3KL1SS)
  • 3570-206 Sulphur Dioxide 0-15.0ppm (5.0 to 20.0ppm, 5.0ppm) (S3KS1SS)
  • 3570-207 Chlorine Dioxide 0-1.00ppm (S3KX1SS)
  • 3570-208 Nitrogen Monoxide 0-100ppm 9S3KM1SS)
  • 3570-209 Nitrogen Dioxide 0-10.0ppm (5.0 to 50.0ppm, 5.0ppm) (S3KN1SS)
  • 3570-210 Hydrogen 0-1000ppm (S3KG1SS)
  • 3570-211 Hydrogen 0-10,000ppm (S3KG2SS)
  • 3570-212 Hydrogen Chloride 0-10ppm (10.0 to 20.0ppm, 1.0ppm) (S3KR1SS)
  • 3570-213 Hydrogen Fluoride 0-12.0ppm (S3KF1SS)
  • 3570-214 Ammonia 0-200ppm (50 to 200ppm, 50ppm) (S3KA1SS)
  • 3570-215 Ammonia 0-1000ppm (200 to 1000ppm, 50ppm) (S3KA2SS)
  • 3570-216 Phosphine 0-1.2ppm (S3KP1SS)

Series 3000 MkII datasheet

Series 3000 MkII user manual