Tempo Telscout TS100 time domain reflectometer cable fault locator

The Greenlee/Tempo Telscout TS100 time domain reflectometer (TDR) cable fault locator is designed for ease of use. You'll spend less time operating the TDR and more time repairing faults. Simply select the cable type to be tested and the Telscout TS100 does the rest. Impedance, Vp, gain, pulse width and vertical position are automatically selected and adjusted as you scan the cable. Just move the cursor to the fault to pinpoint its location.

On the performance side, the Telscout TS100 employs optimized pulsing and sampling coupled with advanced filtering and signal processing techniques to insure the maximum measurement range. That way, you'll always have a clean waveform for easier fault interpretation.

The TS100 provides a 5 ns pulse width for close in resolution. Faults as near as 3 ft. can be located with ease.

Up to 20 waveforms can be stored in memory together with notes, with the ability to print either stored or displayed waveforms via the serial output.

Best of all, you get all this performance in a rugged handheld TDR package. Come snow, rain, heat and humidity, the Telscout TS100 keeps working, because you have to.

• Features:
  • One step setup with automatic instrument control mode.
  • 10 km (30,000 ft.) fault location capability.
  • Accurate to ±3 ft. at 10,000 ft.
  • Splash and drip proof.
  • Twisted pair and coax testing.
  • Two pair test capability.
  • Pair comparison mode and splits/crosstalk mode.
  • Measures distance to fault in feet, metres or time.
  • Configurable for any cable type and Vp (0.300 to 1.000).
  • Internal storage for 20 waveforms with notes.
  • Serial printer output for stored or displayed waveforms.
  • Single button zoom function and large backlit display.

• Supplied complete with:
  • Lead set.
  • Carry case.
  • Re-chargeable battery and charger/adaptor.

Telscout TS100 datasheet