Testo flue gas analyser fixed price service and calibration

Now offering calibration While-U-Wait*, JMW is a Testo approved specialist calibration and service centre located in Harlow, Essex just 25 miles from the centre of London. The JMW calibration and service team are long serving, experienced and fully factory trained by Testo. With a calibration laboratory supported by a quality management system accredited to BS EN ISO9001:2000, all certificates of calibration are traceable to international standards.

JMW's objective is to provide you, the customer with a rapid calibration service, combined with first class product assistance and technical support. As an approved service centre JMW are authorised to perform warranty repairs free of charge in line with the manufacturer's warranty.

Service Price & Features
Testo 310 flue gas analyser £118.80
Testo 320B flue gas analyser £118.80
Testo 327-1 flue gas analyser £142.80
Testo 330-1 flue gas analyser £202.80
Annual Health Check
ISO Calibration Certificate
Replacement O2 and CO sensors when required
Fast postal service - 5 days door to door
While-U-Wait* service & calibration option

Fixed charge service available on correctly maintained Testo 310, 320B, 327-1 and 330-1 flue gas analysers manufactured after 1st January 2011.
5 day door to door service UK Mainland only, excludes weekends, seasonal and public holidays.
An additional charge of £14.40 each way applies if DPD Local collection or return is required.
The cost of the replacement Testo 330 optional NO sensor is not included.
Replacement components and consumables other than the oxygen and carbon monoxide sensors are chargeable at the manufacture's list price. Analysers that have not been serviced on a regular annual basis may not be eligible for a fixed price service
Damage due to misuse and abuse is not covered.
  • Testo flue gas analysers not covered by the above fixed price service are charged as follows:
  • Testo 325-1 (obsolete instrument)
    • Year 1, Service & calibration - £104.40
    • Year 2, (O2) & (CO) sensor replacement, service & calibration - £489.60
    • Year 3, Service & calibration - £104.40
    • Year 4, (O2) & (CO) sensor replacement, service & calibration - £489.60
    • Year 5, Service & calibration - £104.40
    • Etc.
    • Contact JMW for the prices of other models and variants
    • All prices exclude carriage charges (£14.40 where applicable)
  • Testo 325-M (obsolete instrument)
    • Year 1, Service & calibration - £104.40
    • Year 2, (O2) & (CO) sensor replacement, service & calibration - £355.20
    • Year 3, Service & calibration - £104.40
    • Year 4, (O2) & (CO) sensor replacement, service & calibration - £355.20
    • Year 5, Service & calibration - £104.40
    • Etc.
    • Contact JMW for the prices of other models and variants
    • All prices exclude carriage charges (£14.40 where applicable)
  • Testo 327-1 manufactured before 1st January 2011
    • Year 1, Service & calibration - £104.40
    • Year 2, Service & calibration - £104.40
    • Year 3, (O2) & (CO) sensor replacement, service & calibration - £314.40
    • Year 4, Service & calibration - £104.40
    • Year 5, Service & calibration - £104.40
    • Year 6, (O2) & (CO) sensor replacement, service & calibration - £314.40
    • Year 7, Service & calibration - £104.40
    • Etc.
    • Above prices only relate to Testo 327-1 flue gas analysers manufactured before 1st January 2011
    • Contact JMW for the prices of other models and variants
    • All prices exclude carriage charges (£14.40 where applicable)
  • Testo 330-1LL manufactured before 1st January 2011
    • Year 1, Service & calibration - £104.40
    • Year 2, Service & calibration - £104.40
    • Year 3, Service & calibration - £104.40
    • Year 4, Service & calibration - £104.40
    • Year 5, (O2) & (CO) sensor replacement, service & calibration - £707.76
    • Year 6, Service & calibration - £104.40
    • Etc.
    • Above prices only relate to Testo 320-1LL flue gas analysers fitted with 5 year sensors manufactured before 1st January 2011
    • Contact JMW for the prices of other models and variants
    • All prices exclude carriage charges (£14.40 where applicable)
  • What's included:
    • Traceable calibration certificate, detailing:
      • Oxygen
      • Carbon monoxide
      • Temperature
      • Pressure
      • Instrument specification
      • Reading obtained before any adjustments are made
      • Whether the initial reading is within specification
      • Final reading after any adjustments are made
      • See calibration certificate example.
    • In addition the instrument is serviced:
      • Free firmware upgrades as appropriate
      • Battery performance checked
      • Pump, checked and cleaned
    • Any accessories returned with the instrument are checked at no additional cost
      • Printer checked
      • Combustion probe checked
  • Loyalty discount:
    • Returning customers receive a loyalty discount on the calibration price
      • To qualify the analyser must be calibrated on or before the calibration due date
  • Features:
    • Fast turnaround.
      • Send the handheld instrument only, by recorded mail
      • Alternatively JMW will arrange next day collection via DPD Local
    • Local "While-U-Wait*" calibration service (strictly by appointment only)
      • JMW located in Harlow, CM18 7NF. Use M11 Junction 7, north of M25 Junction 27
    • Instrument database
      • Free of charge annual calibration recall notices
    • Copy calibration certificates
      • Supplied free of charge by email
    • Technical advice and support
  • Calibration "While-U-Wait"
    • Calibrated and ready to use within the hour
    • *A While-U-Wait administration surcharge of £12.00 per analyser applies.
    • Phone 01279 307100 for an appointment
  • Sending your Testo flue gas analyser for calibration:
    • What do I need to send?
      If you're happy that the accessories are all working fine (probe, printer, charger etc.) just send the Testo analyser handheld instrument
      How do I send it?
      Package the instrument in a suitable box with some wrapping for protection (shoe box, newspaper etc.)

      Include your contact details in the package;
      Your name
      Company name (if appropriate)
      Your full postal address
      Your mobile telephone number
      Your email address

      Address the package to:
      JMW Limited
      Warwick House
      Perry Road
      Harlow
      CM18 7NF

      Or download a service return form

      JMW recommend that you send your flue gas analyser first class recorded mail
      (Note: Alkaline metal or nickel metal hydride (NiMH) batteries used in the Testo thermal printer should not be sent by Royal Mail, see .... Remove any batteries from the printer before posting and retain for later use.)
      DO NOT include payment at this time
      On receipt the instrument will be examined and a detailed, free of charge, no obligation quotation emailed for your approval prior to any costs being incurred
      A text message will be sent advising you of the emailed quotation
      Pick up the phone to discuss the quotation and, if you are happy to pay by card
      (Cheques and payment by BACS are also accepted)
      On completion your instrument will be returned via DPD Local who will contact you by email and text to advise you of the delivery date and time (within one hour), they will also offer you various delivery options